Godox QS1200II Flash Head User Manual
Page 6
FOREWORD
Thanks for choosing QSII series studio flash. It is a durable and high-
performance strobe with complete functions to help professional
photographers create desired lighting effects. This product is suited for
wedding, advertisement, portrait, and fashion photography. The perfect light
source and a Must in studios and photo workshops!
The QSII flash offers:
CONTENTS
15
Slave Trigger Model
•
15
Buzz Function
•
15
Key Combination
•
15
Alarm Display
•
15
Memory Function
•
16
Wireless Control Function
•
17
Tube Replacement
•
18
Technical Data
18
Maintenance
Bulilt-in Godox 2.4G wireless X system
Precise output displayed on LCD panel, 50 steps from 1/32 to 1/1 (or 5.0-10.0) in 0.1
increments.
High-qualified modeling lamp, 150W output and 5% to 100% manual light adjustment
Outstanding output stability, a tolerance of
≤
2% under the same output
Anti-preflash function, enabling synchronization with cameras having a one-preflash
firing system
Adjusted parameters intelligently remembered after 3s and automatically recovered
after a restart
Wireless control of the flash power ratio, the on-and-off of modeling lamp and buzzer,
as well as flash triggering with Godox X1, XT16 or FT-16 flash trigger.
09
Foreword
10
Warning
10
Caution
11
Names of Parts
Body
11
•
12
LCD Panel
•
12
Accessories
•
12
Separately Sold Accessories
•
13
Operations
13
Flash Preparation
•
13
Power Connection
•
13
Modeling Lamp
•
14
Power Output Control
•
14
Test Button
•
14
Sync Triggering
•
14
GR/CH Button
•
To prevent damage to the product or injury to you or to others, read the
following warnings in their entirety before using this product. Keep these
safety instructions where users can read them for ready reference.
Do not disassemble or modify. Should the product break down, send the defective back to the
authorized service center for inspection and maintenance.
Keep dry. Do not handle with wet hands, immerse in water, or expose to rain.
Keep out of reach of children.
Please put the device in a ventilation environment and keep the parts of lighting and heat
dissipation holes are unobstructed. Do not use in flammable environment.
As this product adopts make and break device, please keep it easy to be used.
No touching the heating parts of this product.
Please turn off the power and wear insulated gloves before installing and connecting
accessories. When replacing the tube or modeling lamp, please make sure that the tube is cool
and wear insulated gloves to prevent burns.
Do not flash directly towards naked eyes (especially those of babies), otherwise it may lead to
visual impairment.
Disconnect from the power supply when it will not be used for an extended period.
The apparatus shall not be exposed to tripping or splashing and that no objects filled with
liquids, such as vases, shall be placed on the apparatus;
An apparatus with CLASS I construction shall be connected to a MAINS socket outlet with a
protective earthing connection;
The MAINS plug or an appliance coupler is used as the disconnect device, the disconnect
device shall remain readily operable;
Apparatus shall not be exposed to tripping or splashing and that no objects filled with liquids,
such as vases, shall be placed on the apparatus;
The lamp shall be changed if it has become damaged or thermally deformed;
The luminaire is intended for professional use only;
If the external flexible cable or cord of this luminaire is damaged,it shall be replaced by a special
cord or cord exclusively available from the manufacturer or his service agent.
CAUTION
After 30 continuous flashes at full power, the flash should be cooled down for about 3 minutes.
Overheating will occur if it is used continuously without cooling down.
Do not keep using the modeling lamp for a long time; otherwise flammable accessories
attaching to flash head, e.g. softbox will get burnt. A 10-minute time is recommended in this
case. After 10 minutes, cool it down for 1 minute.
When using a snoot, do not keep the modeling lamp on for a long time or fire too frequently
(not over six times for one minute). Overheating will result in damages for strobe housing
and/or studio light.
Avoid sudden impacts as this can damage the flash tube and/or modeling lamp.
Warning
- 09 -
- 10 -