Godox SK300II-V Studio Flash Monolight (3-Light Kit) - Manual (Page 6)

Tube Replacement
Shut down the power and remove the power cord before replacing the flash tube.
Wear insulated gloves to loosen the iron wire on the tube, keep a balanced hold
on the two feet of the flash tube and pull out the old tube gently. Take down the
feet casing from the old tube and put it on the new one. Hold two feet of the new
tube, and target directly towards the two copper outlets, then push them slightly
in. Twine the iron wire on the stainless steel sheet to fix the flash tube.
MAINTENANCE
Shut down the device immediately when it works abnormally and find out the
reason.
Avoid sudden impacts and the lamp should be dedusted regularly.
It is normal for the lamp to be warm when in use. Avoid continuous flashes if
unnecessary.
Maintenance of the flash must be performed by our authorized maintenance
department which can provide original accessories. The flash-tube and the
modeling lamp are user-replaceable. Replacement tubes and lamps can be
obtained from the manufacturer.
This product, except consumables e.g. flash tube and modeling lamp, is
supported with a one-year warranty.
Unauthorized service will void the warranty.
If the product had failures or was wetted, do not use it until it is repaired by
professional.
Disconnect the power when cleaning the flash or when changing the flashtube /
modeling lamp.
Changes made to the specifications or designs may not be reflected in this
manual.
TECHNICAL DATA
- 17 - - 18 -
Model
Max Power (Ws)
Guide Number (m ISO 100)
Color Temperature
Operating Voltage
Power Output Control
Modeling Lamp (W)
Modeling Lamp Level
Recycle Time
Triggering Method
Flash Duration
Parameters output from
the sync cord jack
Parameters output from
the USB port
Fuse
Dimension
Net Weight
SK400II
400Ws
65
SK300II
300Ws
58
5600±200k
AC110V-120V~60Hz or AC220V-240V~50Hz
6.0~10.0(1/16~1/1)
150W
5%~100%
0.1~1s
Sync cord, Test button, Slave triggering, Wireless control port
1/2000~1/800s
5V
5V/200mA (only for Godox receiver)
AC220V-240V~50Hz: 5A
AC110V-120V~60Hz: 8A
Flash diameterΦ12.7cm,
height of flash with handle 20.6cm
length of flash with lamp cover 34cm
Approx. 1.9kg
Flash diameterΦ12.7cm,
height of flash with handle 23.2cm
length of flash with lamp cover 38cm
Approx.2.1kg