Planar Systems PXL3280W 31.5" 16:9 QHD IPS Monitor - Manual (Page 8)

First Setup
Install the stand base
1. Lay the LED LCD Monitor flat on a table with the LED screen face down. To prevent the monitor
from being scratched, put a piece of soft cloth on the table on which the screen will be set.
2. Unpack the stand, one hand hold the monitor, the other hand attach the stand to the monitor.
3. Turn the screws (x4) clockwise to attach the base to the monitor.
4. Stand the LED LCD Monitor up.
Disconnecting the stand base
1. Lay the LED LCD Monitor flat on a table with the LED screen face down. To prevent the LED
LCD Monitor from being scratched, put a piece of soft cloth on the table on which the screen
will be set.
2. Hold the monitor down with one hand. With the other hand, turn the screw counterclockwise
to remove the screws (x4) that holding your monitor to the stand.
3. Remove the stand from the monitor.
6
1
2