LG UQ7570PUJ 50" 4K HDR Smart LED TV - Manual (Page 12)

Pairing the Magic Remote
You must pair the Magic Remote with the LG webOS TV to use it.
Pair the Magic Remote prior to use as follows:
If the Magic Remote failed to register, turn the TV off and back on, and then try to register
again.
Re-registering the Magic Remote
If the Magic Remote’s pointer does not appear on the TV, you must re-register it.
Unregistering Magic Remote
If you have multiple LG Smart TVs and want to register the Magic Remote currently in
use to another TV, you must unregister the previous one.
Using the Magic Remote
Using the Remote Control Button
Briefly press or press and hold remote control button to access various functions.
Turn on the TV. After about 20 seconds, point the remote toward the TV and then
press the
Wheel (OK) .
01
The remote control will be registered automatically, and the pairing completion
message is displayed on the TV screen. 02
Hold the remote control towards the TV and press the and buttons at the same
time for more than 5 seconds until instructions appear. 01
The previously registered remote control is deregistered and then registered again. 02
If you press the button and the button at the same time for more than 5
seconds, the lamp on Magic Remote will blink and the registration will be canceled.
01
If you want to unregister and register for another LG Smart TV, please follow the
registration method above. 02
12