StarTech.com 40-Pin PATA to 2.5" SATA HDD/SSD/ODD Converter - Manual

40-Pin IDE PATA to SATA Adapter Converter for HDD/SSD/ODD
StarTech ID: IDE2SAT2
The IDE2SAT2 40-pin IDE to SATA adapter enables you to connect a SATA I/II/III drive to an available IDE/ATA
33/66/100/133 motherboard port - a cost effective solution that allows you to add newer SATA drives, and keep
your existing motherboard.
The IDE/SATA adapter offers a cost-effective solution for bridging the gap between a newer 2.5"/3.5"/5.25" SATA
drive and older IDE motherboard port. The IDE2SAT2 also features ODD (Optical Disk Drive) support, allowing you
to a add Blu-ray, DVD, or CD-ROM drives to an older IDE motherboard.
The IDE/SATA adapter is backed by a StarTech.com 2-year Warranty and free lifetime technical support.
Applications
An internal solution for connecting your SATA hard drive to a motherboard supporting an IDE interface
Ideal for use with older motherboards that do not support SATA
Features
Connect a SATA device to an IDE/ATA motherboard or controller card
Complete hardware solution; no software required
Support for 48-bit Logical Block Addressing (LBA)
Compliant with SATA revision 1.0 specification
Compatible with Ultra ATA 133 specification
Supports 2.5", 3.5", and 5.25" SATA Drives
ODD (Optical Disk Drive) support, including Blu-ray, DVD, and CD-ROM drives