Sony X85K 50" 4K HDR Smart LED TV User Manual
Page 45
45
Detailed Menu Description
C
h
a
p
te
r 5
M
e
nu
It
em
s
ALT/
[F5]
TC2 SEL
Sets whether to use two lines for the time code display section and selects the time
code type for 2nd line when the screen is one-port display.
For input ports:
Off
TCG
TM1
TM2
UBG
For output ports:
Off
LTC
VITC
TM1
TM2
UBR
UBV
I/O
ALT/
[F7]
CHAR SET
Sets the time code and other character information to superimpose on the signal
output from the MONITOR connector of SD/HD SDI.
Out
[F1]
POSITION
Allows you to set the display position of character information with the cursor
buttons.
Out
[F2]
SIZE
Sets the display size of character information.
Small
Medium
Out
[F3]
INFO SEL
Sets the character information content for when ALT/
[F10]
(CHAR ON) is set to On.
Time (Timedata Only):
Timer counter display information only
T&V (Timedata & VITC):
Timer counter display information and VITC
T&T1 (Timedata & TM1):
Timer counter display information and TM1
T&T2 (Timedata & TM2):
Timer counter display information and TM2
T&UB (Timedata & UBIT):
Timer counter display information and user bits
T&sta (Timedata & Status):
Timer counter display information and operation status
Out
[F4]
TYPE
Sets the background of character information.
Outl (Outline):
White characters with black outlines
Trnsl (Translucent):
White characters on a gray screen background
Wo/BG (Without BG):
White characters with no background
W/BG (With BG):
White characters on a black background
Out
[F6]
WARNING
Sets whether to display a flashing warning message on the second line when an
item other than “Time” is selected with
[F3]
(INFO SEL).
Off
On
Unit
[F10]
EXIT
Redisplays the previous menu.
–
ALT/
[F9]
META SET
Sets uncompressed metadata.
I/O
[F1]
LINE1
Sets from which lines to acquire the uncompressed metadata.
In 1080 59.94i, 1080 50i, 23.98P/24P mode:
9H to 16H
or
18H to 20H
In 720 59.94i/59.94P/29.97P, 720 50i/25P mode:
9H to 16H
or
18H to 25H
In
[F2]
LINE2
[F3]
LINE3
[F10]
EXIT
Redisplays the previous menu.
–
ALT/
[F10]
CHAR ON
Sets whether to superimpose the characters representing the time data and
operation status on the signal output from the SD/HD SDI MONITOR connector.
Off
On
Out
Button
Indication
Setting
Target