Sony LHP-1 Lens Hood User Manual
Page 86
3. Camera Operations: Paint Menu
86
Paint >
White Clip
Makes settings related to white clip adjustment.
[Note]
White Clip is grayed out and cannot be operated when Project > Basic Setting > Input Color Space (page 72) is set
to S-Gamut3.Cine/SLog3 or S-Gamut3/SLog3 in the full menu.
Menu item
Setting
Description
Setting
On/
Off
Turns the white clip adjustment function on/
off.
Level
60.0% to 108.0% to
109.0%
Sets the white clip level.
Paint >
Detail
Makes settings related to detail adjustment.
Menu item
Setting
Description
Setting
On
/Off
Turns the detail adjustment function on/off.
Level
–99 to
±0
to +99
Sets the detail level.
H/V Ratio
–99 to
±0
to +99
Sets the mix ratio of the H detail level and V
detail level.
Crispening
–99 to
±0
to +99
Sets the crispening level.
Level Depend
On
/Off
Turns the level dependence adjustment
function on/off.
Level Depend Level
–99 to
±0
to +99
Sets the level dependence level.
Frequency
–99 to
±0
to +99
Sets the center frequency of the H detail
signal (larger values give finer detail).
Knee Aperture
On/
Off
Turns the knee aperture correction function
on/off.
Knee Aperture Level
–99 to
±0
to +99
Sets the knee aperture level.
Limit
–99 to
±0
to +99
Sets the detail limiter for both the white side
and black side.
White Limit
–99 to
±0
to +99
Sets the detail limiter for the white side.
Black Limit
–99 to
±0
to +99
Sets the detail limiter for the black side.
Paint >
Matrix
Makes settings related to matrix correction.
Menu item
Setting
Description
Setting
On/
Off
Turns the matrix correction function on/off.
User Matrix
On/
Off
Turns the user matrix correction function on/
off.
User Matrix R-G
–99 to
±0
to +99
Sets matrix coefficients individually for fine
adjustment of the color of the whole image.
User Matrix R-B
–99 to
±0
to +99
User Matrix G-R
–99 to
±0
to +99
User Matrix G-B
–99 to
±0
to +99
User Matrix B-R
–99 to
±0
to +99
User Matrix B-G
–99 to
±0
to +99
Paint >
Multi Matrix
Makes settings related to multi matrix correction.
[Note]
Multi Matrix is grayed out and cannot be operated when Matrix is set to Off.
Menu item
Setting
Description
Setting
On/
Off
Turns multi-matrix correction function on/off
for setting the saturation in 16-axis hue space.
Area Indication
On/
Off
Turns the display of a zebra pattern in the
color area of the screen targeted for multi
matrix correction on/off.
Reset
Run/Cancel
Sets all [Hue] and [Saturation] values on each
axis to default values (execute by selecting
Run).
Axis
B
/B+/MG–/MG/MG+/R/R+/
YL–/YL/YL+/G–/G/G+/CY/
CY+/B–
Sets the color targeted for multi matrix
correction (16-axis mode)
Hue
–99 to
±0
to +99
Sets the hue of the color targeted for multi
matrix correction for each of the 16 axes.
Saturation
–99 to
±0
to +99
Sets the saturation of the color targeted for
multi matrix correction for each of the 16 axes.