Samsung MX-ST90B Sound Tower 1700W Wireless Party Speaker - Manual (Page 26)

ENG - 20
Using Bluetooth Power On
When the Sound Tower is turned off, you can connect your smart device via a Bluetooth connection to
turn it on.
1. Press and hold the BASS button on the remote control or on the top panel to enable the Bluetooth
Power On function. Lighting bar will blink white once.
2. When the Sound Tower is off, connect your smart device via Bluetooth. (For information on
Bluetooth connections, refer to your smart device’s manual.)
3. When the connection is complete, the Sound Tower turns itself on automatically in Bluetooth
mode.
• Select the desired music to play from your smart device.
NOTE
• Each time you press and hold the BASS button for 5 seconds, the LED lighting bar will blink white
once and the status will alternate as follows:
BLUETOOTH POWER-ON→BLUETOOTH POWER-OFF
Connecting a Samsung TV via Bluetooth
When a TV is connected using Bluetooth, you can hear TV sound without the hassle of cabling.
(Only one TV can be connected at a time)
Precondition
• When connecting to a new BT device, make sure it is within 3.28 ft (1 m) distance.
• While in wireless Group Play or Stereo mode, the Sound Tower cannot search for a TV via Bluetooth.
• If the Samsung TV doesn’t support “ Easy Connection ”, ” SEARCHING TV ” mode can not connect to a
TV. Set your Sound Tower to “ BT PAIRING ” mode and connect the Samsung TV.
LIGHT
PAIRING TEMPO
USB AUX
EFFECT EFFECT DJ
SOUND MODE
OR
Pairing(blinks) Connected
1. Press and hold (Source) for more than 5 seconds on remote control or top panel then Sound
Tower will start to search for the Samsung TV. Lighting bar will blink white once and then blink
cyan, The “
PAIRING ” LED will slowly blink.
(Or, when the wired Stereo Group mode connection is complete, the “ SEARCHING TV ” mode is
automatically activated.)
2. If Samsung TV has connected with Sound Tower before, Samsung TV will be connected without
popup.