GRAM FS 3105-90/1 - Manual (Page 93)

EN
10
areas are designed to be warm to
avoid condensation.
Electric connection
Connect your product to a grounded
socket which is being protected by a
fuse with the appropriate capacity.
Important:
accordance with with national
regulations.
accessible after installation.
not be used for connection.
B
A damaged power cable must be
replaced by a qualified electrician.
Disposing of the packaging
The packaging may be dangerous
children or dispose of it by classifying it in
accordance with the waste instructions.
Do not dispose of it together with the
normal household waste.
The packaging of your refrigerator is
made from recyclable materials.
Disposing of your old freezer
Dispose of your old freezer without
harming to the environment.
retailer or the recycling depot in your
municpality about the disposal of your
freezer.
out the electric plug and, if there are
any locks on the door, make them
inoperable in order to protect children
against any danger.
Placing and Installation
1. Install your freezer in a place that
allows ease of use.
2. There must be appropriate air
ventilation around your refrigerator in
order to achieve an efficient operation.
3.Place your freezer on an even
floor surface to prevent jolts.
4. Do not keep your freezer in ambient
temperatures under 10°C.