İhlas Teamatic - Manual (Page 5)

• Unplug power cord by pulling it out of its housing. Fill the kettle
with 1 litre of water, close the cover and plug the appliance in a
grounded outlet. In order to operate, adjust the thermostat as “max".
• When the water is boiling, turn the button to the left until the light
goes out. Afterwards, the thermostat functions automatically. It
does not let the water cool down and preserves it at the tempera-
ture you like. (Figure 4)
• Do not operate the appliance
without any water. In order not to
let the appliance work without
water after all the water has
evaporated, do not operate it
unsupervised. When the red light
under the button is on, it means
the appliance is in operation.
• The appliance is equipped with
an adjustable thermostat. This
means that when the water in
the appliance reaches a certain
boiling point, the circuit is
automatically cut. If you only
want warm water, turn the
button from “max” towards “min".
To raise the water temperature,
turn the button from “min”
towards “max”. (Figure 4)
IN ORDER TO BREW STANDARD TEA
• Put (1) table spoon of tea for every (5) glasses and add the water
boiling in the kettle.
• Open the cover of the kettle and place the infuser upon it.
• Wait until the tea is brewed.
• In parallel with your taste and experience, you might adjust the
process to brew the tea to your liking.
CAUTION!
When the kettle is out of water,
limit thermostat operates and
cuts the electricity supply
automatically. (After the
appliance has cooled down)
Press the yellow button to
operate again.
Figure 3
Figure 4
Figure 5
USAGE