Wet spill vacuuming warning, Warning, Now, your device is ready to vacuum wet spills – İhlas Aura QVac User Manual
Page 8

8
In the event of a wet spill in your home, your device can be used to remove liquids from
your floor.
Use the following steps convert your device from sweeping mode to wet vacuuming mode.
Wet spill vacuuming
WARNING
NOW, YOUR DEVICE IS READY TO VACUUM WET SPILLS.
Do not use your device to vacuum any hazardous liquids like flammable liquids,
corrosives, acids, oil based liquids, etc...
Pull power cable and
insert its plug into the
main power supply.
If needed, attach the
rubber to the big/mini
washing nozzle by
sliding tool onto the
front of the head.
11
12
10
Press power on
button. If machine is
on, the led light will be
illuminated.
Remove the cartridge
filter by turning the lock
anticlockwise and
pulling outwards.
Instead of cartridge
filter, fasten sponge
filter in-place by
inserting.
Lift the head unit from
the dirt collection
tank.
1
3
4
Tighten the filter
securing lock
clockwise.
5
Replace head unit on
dirt collection tank
and lock the clips.
Attach suction hose
to inlet connector.
Insert handle into end
of telescopic tube
6
7
8
Attach big/mini washing
nozzle to telescopic tube
and lock it in place.
9
Remove the dust bag
from the dirt
collection tank.
2
WARNING
During vacuuming, if the water level is exceed in the tank, the sound of the device will
be increased. In that case, unplug your device and discharge the water from the tank.