ProSoft Technology ILX69-PBM - Manual (Page 91)

ILX69-PBM ♦ CompactLogix or MicroLogix Platform Contents
PROFIBUS Master Communication Module User Manual
ProSoft Technology, Inc. Page 91 of 124
February 4, 2015
DPV1 Alarm Response
Code Significance Error source Help
86 hex = REJ_INT The alarm handler
is not initialized Device No DPV1 capable device configured within
the module
87 hex = REJ_SRT The alarm handler
is currently stopped
Device No DPV1 capable slave device is in
process data exchange with the device.
Check if network is running.
88 hex = REJ_ENA The alarm that
shall be
acknowledged is
not enabled in
slave parameter
data
Host Enable the corresponding alarm in slave
configuration data set
89 hex = REJ_NPD The alarm that
shall be
acknowledged is
not pending on a
MSAL1_Alarm_Re
s
Host Check the parameter AlarmType and
Seq_Nr. Both must be equal to the
MSAL1_Alarm_ind parameter
9a hex =
REJ_COM Unknown msg.b
command Host Correct the requested msg.b parameter of
message