Sandia 6-Quart Raven Backpack Vacuum - Manual (Page 6)

(6) Raven 6-Quart Backpack Vacuum Raven 6-Quart Backpack Vacuum (11)
1.0 Safety Instructions Continued
Reduce the Risk of Fire, Electric Shock or Injury .
• DO NOT tie an extension cord to the pigtail cord. This will damage the cord and will
VOID your warranty.
• DO NOT handle the plug of the vacuum with wet hands.
• DO NOT vacuum up any liquids. This vacuum is for dry use only!
• DO NOT expose to rain or use on wet surfaces, to avoid electric shock. Store indoors.
• DO NOT pick up anything that is burning or smoking such as cigarettes, matches or
hot ashes.
• DO NOT use the vacuum to pick up flammable or combustible liquids such as
gasoline or use in areas where they may be present.
• DO NOT use where oxygen or anesthetics are used.
• DO NOT put objects into openings or use with any openings blocked. Keep free
of dust, lint, hair and anything that may reduce air flow. Keep hair, loose clothing,
fingers, and all body parts away from openings and moving parts to ensure safe
operation.
• DO NOT use without the proper cloth filtration bag, paper filter bag and other filters in
place. Failure to do so, will VOID your warranty.
• DO NOT use if any hoses or nozzles are damaged, cut or punctured.
• DO NOT lubricate the motor. If the motor is lubricated, this will VOID your warranty.
2.0 Grounding Instructions
DANGER: IMPROPER GROUNDING METHOD CAN RESULT IN A RISK OF
ELECTRIC SHOCK!
Electrical equipment must be grounded. Improper connection of the equipment grounding
conductor can result in a risk of electric shock. If the equipment should malfunction or
breakdown, grounding provides a path of least resistance for electrical current to reduce
the risk of electric shock.
This vacuum is equipped with a cord containing a grounding conductor and grounding
plug. The plug must be inserted into an appropriate outlet that is properly installed and
grounded in accordance with all local codes and ordinances.
Check with a qualified electrician or service person if you are in doubt as to whether the
outlet is properly grounded. DO NOT modify the plug provided with the equipment. If it
will not fit into the outlet, have a proper outlet installed by a qualified electrician.
If repair or replacement of the cord or plug is necessary, DO NOT connect the grounded
wire to a flat bed terminal. The wire with insulation having an outer surface that is green
with or without yellow stripes is the grounding wire.
NOTE: In Canada, the use of a temporary adapter is not permitted by the Canadian
Electrical Code.
6.0 Machine Schematic Drawing