Epson AcuLaser CX37DNF - Manual (Page 53)

❏ TCP/IP
❏ DHCP (Only when changed from DISABLE to ENABLE)
❏ BOOTP (Only when changed from DISABLE to ENABLE)
❏ ARP/PING (Only when changed from DISABLE to ENABLE)
❏ IPv6 - AUTO SETTING (Only when changed from NO to YES)
❏ NETWARE
❏ IEEE802.1X
Using the Network Setting Menu Options
If the printer is connected to a network, the following settings should be specified. For details about
each setting, contact your network administrator.
Note:
Do not use an IP address within the following ranges.
❏ 0.0.0.0 - 0.255.255.255
❏ 127.0.0.0 - 127.255.255.255
❏ 224.0.0.0 - 255.255.255.255
TCP/IP
Purpose Enables or disables TCP/IP.
Options DISABLE /ENABLE
Default ENABLE
IP ADDR. SETTING
IP ADDRESS
Purpose Sets the IP address of this machine on the network.
Default 0.0.0.0
Epson AcuLaser CX37 Series Reference Guide
Understanding the Network Setting Menu 53