Silvercrest SFE 450 C1 - Manual (Page 43)

- 40 -
• Do not touch any rotating parts.
• Turn the appliance off after use and remove the
power plug from the wall socket. Only when the
motor has come to a complete stop may the
appliance be disassembled.
NEVER use the appliance:
• If the filter/sieve, power cable or power plug are
damaged,
• In the case of malfunctions, or if it has otherwise
been damaged or dropped. Send the appliance
to Customer Services for checking and/or repair.
• The use of attachments and accessories not re-
commended or sold by the manufacturer can
cause fire, electric shocks and/or personal in-
juries.
Tips for safety:
• In cases of danger, immediately remove the power
plug from the wall socket.
• Use the appliance exclusively for the purposes
described in these operating instructions.
• Always be alert! Always pay attention to what
you are doing and act with common sense. Ne-
ver use the appliance when you are distracted
or don’t feel well.
• Ensure that the appliance is correctly and com-
pletely assembled before taking it into use. The
appliance can first be taken into use when the
clamps have been closed.
• After every use of the juice extractor ensure that
the On/Off switch is moved to the position "Off"
("0"). . The motor must come to a complete stop
before you begin to disassemble the appliance.
• Remove the power plug from the wall socket
when the appliance is taken out of use, when
removing components and before cleaning it.
• Do not use the appliance outdoors.
Assembling and operating the
appliance
• Thoroughly clean all component parts as descri-
bed in the section "Cleaning and care" before
using the appliance for the first time.
• Select a safe and secure positioning for the
juice extractor. For optimal handling we recom-
mend that the appliance is positioned with the
power cable running from the rear of the app-
liance to the wall socket. All operating elements
can now be directly and easily handled:
- at the front, the On/Off switch
o ,
- to the left, the container for fruit pulp and
vegetable mash s .
- to the right, the outlet pipe for the juice y .
Warning:
Ensure that the appliance is switched off and the plug
removed from the wall socket before assembling the
appliance. If you do not, there is a great risk that
you could injure yourself.
1. Place the juice container t on the appliance
base u , so that the three detents and the juice
outlet y are securely engaged in the recesses.
2. Place the filter d on the drive shaft f and press
it down so that it perceptibly engages. Ensure
that it is firmly seated before continuing with the
assembly.
3. Slide the container for fruit pulp and vegetable
mash s from below under the ejection shaft
(see fold-out page).
4. Place the housing lid e on the juice container t
so that the loading shaft w is seated
above the cutters in the filter d .
5. Ensure that the housing lid e is seated firmly in
the recesses of the juice container t . Lift the
clasps r and clip them into the notches on the
housing lid e .
6. Press the lower part of the claps r ragainst the
appliance until they engage.
IB_86683_SFE450C1_LB2 16.01.2013 7:56 Uhr Seite 40