Silvercrest SFS 150 B3 - Manual (Page 71)

68 SFS 150 B3
GB
♦ Open the appliance lid by pressing the lid releases to the top.
♦ Place a bag opening on the sealing wire . To ensure that the bag is fi xed
in place and does not slip, place the end of the bag below the suction con-
nectors
. For this you can lift them slightly. The bag needs to extend up to
the marking "Seal", which is marked on the appliance.
NOTICE
► The bag opening must lie smoothly on the sealing wire . Otherwise, the
sealing does not function properly.
♦ Close the appliance lid. When doing so, ensure that both corners engage.
If necessary, press the corners down lightly until the device lid is engaged
properly. If the device lid is not properly engaged, the sealing process can-
not be started!
♦ Press the sealing button with both hands. The indication lamp illuminates.
♦ Hold the sealing button pressed down until the indication lamp
extinguishes.