Before using for the ﬁrst time, Preparing sandwiches – Silvercrest H-3265 User Manual

Page 9

H-3265

4. Before using for the ﬁrst time

During manufacture, many parts are given a
thin ﬁlm of protective oil. Before using the
appliance for the ﬁrst time, heat it up without
sandwiches so that any residues can
evaporate.

Note:

When heating up for the ﬁrst few time

a slight smell may be produced. Make sure
the room is adequately ventilated.
1. Take the appliance and all the accessory

parts out of the packaging.

2. Check that the appliance shows no signs

of damage.

3. Clean the appliance before using it for

the ﬁrst time. Observe the information in
the section entitled "6. Cleaning" on
page 8.

4. Select a location that is ﬁrm, level and

not ﬂammable. Maintain a distance of
approx. 50 cm from other objects.

5. Unwind the mains cable completely.

6. Insert the plug into a suitable mains

socket.
The red indicator light

now lights up

and the appliance heats up.
As soon as the operating temperature
has been reached, the green indicator
light

lights up.

7. Leave the appliance switched on for

around 10 – 15 minutes.

8. Push up the lock

and open the lid

the lid handle

9. Unplug the mains plug and allow the

appliance to cool down.

10. Clean the appliance again. Observe the

information in the section entitled
"6. Cleaning" on page 8.

Note:

For reasons of taste you should not

eat the ﬁrst toasted sandwiches but should
throw them away.

5. Preparing sandwiches

Notes:

• We recommend toast bread for making

sandwiches.

• Prepare the sandwiches before switching

on the appliance.

• As far as possible, spread the ﬁlling so

that the sandwiches are evenly thick.

1. Select a location that is ﬁrm, level and

not ﬂammable. Maintain a distance of
approx. 50 cm from other objects.

2. Unwind the mains cable completely.
3. Release the lid

by pulling up the lock

and open up the lid

fully by the lid

handle

4. Remove any dust that may be present

using a dry cloth.

5. Close the lid