Livarno Z30347C - Manual (Page 25)

25 GB/MT
Maintenance and cleaning / Disposal
Q Maintenance and cleaning
WARNING! DANGER TO LIFE BY ELEC-
TRIC SHOCK! Before carrying out any work on
the light, switch the electricity supply off at the fuse
box or remove the screw-in fuses from the fuse box.
WARNING! DANGER TO LIFE BY ELEC-
TRIC SHOCK! For electrical safety the light must
never be cleaned with water or other liquids, or
immersed in water.
Q Replacing a bulb
CAUTION! RISK OF BURNS! Switch the
light off. Allow the light to cool down completely
(at least 10 minutes).
Note: Use a clean, fluff-free cloth when you are
replacing a bulb
7 .
j Always use 230 V ~ energy-saving lamps with
E 14 fittings and a maximum rated output of
9 watts.
j Remove the glass dome 5 as described in
the section on “Installation”.
j Remove the defective bulb 7 by turning it
anticlockwise and drawing it out of the socket 8 .
j Insert a new bulb 7 into the socket 8 and turn it
clockwise. Check that the bulb is correctly seated.
j Place the glass dome 5 back on to the light
body 1 as described in the section on
“Installation”.
Q Cleaning
CAUTION! RISK OF BURNS! Switch the
light off. Allow the light to cool down completely
(at least 10 minutes).
j Use a dry fluff-free cloth when you are cleaning.
j Do not use solvents, petrol etc.
Q Disposal
The packaging is made entirely of
recyclable materials, which you may
dispose of at local recycling facilities.
Contact your local refuse disposal authority for more
details of how to dispose of your worn-out product.
Under no circumstances should the
device / article and its bulbs be disposed
of with normal household rubbish.
The device / article and its bulbs should be disposed
of at an officially approved disposal centre or at
your local communal disposal facility.
Observe the applicable regulations. If you are
uncertain of what to do please contact your local
authority’s refuse disposal department.
EMC
Product description:
Wall & Ceiling Light
Model No.: Z30347C
Version: 08 / 2010