beautypg.com

Sealey SPD27W User Manual

Spd27w, Drop spreader 27kg walk behind, Instruction manual for

background image

InstructIon MAnuAL for:

drop spreader 27kg walk behind

MoDEL no:

spd27w

thank you for purchasing a sealey product. Manufactured to a high standard this product will, if used according to these instructions

and properly maintained, give you years of trouble free performance.

1. sAFETY INsTRUCTIONs

IMPORTANT: pLEAsE REAd THEsE INsTRUCTIONs CAREFULLY. NOTE THE sAFE OpERATIONAL REQUIREMENTs, wARNINGs & CAUTIONs.

UsE THE pROdUCT CORRECTLY ANd wITH CARE FOR THE pURpOsE FOR wHICH IT Is INTENdEd. FAILURE TO dO sO MAY CAUsE

dAMAGE ANd/OR pERsONAL INJURY ANd wILL INVALIdATE THE wARRANTY. pLEAsE KEEp INsTRUCTIONs sAFE FOR FUTURE UsE.

2. spECIFICATION

3. INTROdUCTION

4. AssEMBLY

Model No. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . spd27w

capacity (weight) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27kg

capacity (volume) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25ltr

spread . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .560mm

Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5kg

Dimensions (W x D x H) . . . . . . . . . . . . . . .740 x 810 x 775mm

Manufactured with a strong tubular steel frame and polyethylene

dispensing hopper. fitted with adjustable feed system to control

feed quantities. Designed to spread in a continuous line providing

a more accurate application. suitable for a variety of horticultural

agents including grit, seed, salt, fertiliser and weed killer.

4.1 Please note that the two wheels are assembled to the axle

differently. the left hand wheel (as seen from the handle side

of the hopper) is free wheeling. the right hand wheel drives the

blades within the hopper. referring to fig.1 assemble the left

hand wheel first by sliding a Ø12mm flat washer (11) onto the

axle followed by a bushing (5). slide a wheel (15) over the

bushing followed by another Ø12mm flat washer (11). Insert

the smaller split pin Ø3mm x 30 (7) through the holes in the

end of the axle and retain the assembly by bending it over.

4.2 slide another washer (11) and bushing (5) over the axle on the

other side of the hopper ensuring that the holes in the bushing

are adjacent to the side of the hopper. slide the other wheel

over the bushing and align the holes in the inner hub of the

wheel with the holes in the bushing and the hole through the

axle. retain this assembly by inserting the larger split pin

Ø5mm x 45 (8) through all three components. retain the

assembly by bending over the split pin.

Original Language Version

sPD27W Issue: 1 - 13/06/11

Before each use, check that there is no damage to the spreader

and that all fixings are tight.

replace or repair damaged parts. Use only recommended parts.

Unauthorised parts may be dangerous and will invalidate the

warranty.

Ensure that the operator is fully trained and competent to operate

the spreader.

Ensure that all chemical safety instructions are adhered to when

handling products for use in the spreader. A full range of personal

safety equipment is available from your sealey dealer.

Always distribute the load evenly.

Ensure all non essential personnel keep a safe distance when

the spreader is in use.

Keep hands and feet away from moving parts.

dO NOT overload the spreader - see specification.

dO NOT leave unattended, especially when loaded.

dO NOT allow anybody to sit, stand, or ride on the spreader.

dO NOT allow untrained personnel to use the spreader.

dO NOT allow children to play in or climb onto the spreader.

dO NOT use on windy days when spreading seeds or herbicides.

dO NOT tow this spreader with a motorized vehicle of any sort.

dO NOT use the spreader for purposes other than for which it is

designed.

dO NOT operate the spreader when you are tired or under the

influence of alcohol, drugs or intoxicating medicines.

When loaded,

dO NOT operate the spreader over edges, rough

surfaces etc. where the spreader is at risk of overturning.

wARNING! failure to comply with these instructions may result

in damage to spreader or other property and/or personal injury.