Kichler 337014 v.1 - Manual (Page 10)

9
Fig. 17
11. INSTALLING THE LIGHT FIXTURE
Step 1. While holding the light fixture/switch
housing assembly under your ceiling fan, push
the square wire connectors together. One from
the fan and one from the switch housing. (Fig.
17)
NOTE: These connectors are color coded and
will ONLY engage when the colored strips are
matched (aligned).
Step 2. Carefully push all the wires into the
switch housing on the light fixture/switch
housing assembly.
Attach the light fixture/switch housing
assembly to the mounting plate with the three
screws provided. Make sure each screw is
tight. (Fig. 17)
light fixture/
switch housing
assembly
Wire connectors
Screws
Mounting plate