iSys V12 Thermal Printer - Manual (Page 78)

78
9.1 SPECIFICATIONS
PHYSICAL
Dimensions
Height
5.75 inches.
Width 19 inches- standard rack.
Depth 17.25 inches.
19.5 inches with 8.75 inches with fan fold
feeder tray installed
21.5 inches with 12 inch with fan fold feeder
tray installed
Weight
Net Approximately 40 lbs.
This symbol indicates an area of possible concern due to static discharge into the
circuitry. When you see this symbol in the manual, please observe proper static
precautions to minimize damage to the circuitry.
9.2 INSTALLATION
See section 3.1 for unpacking instructions.
Installing the rails
Figure 9-1. Rack mount rails
1. Place the four nut plates (see Figure 9-1) in the desired position on the rack. Install each nut
plate behind the rack bracket. Loosely insert the nut plate screws.
2. Position the rails over the nut plate screws as shown in Figure 9-2. Tighten the nut plate
screws.
3. Tighten the two positioning nuts (shown in Figure 9-1) on each rail.