iHealth Wireless Body Analysis Scale User Manual

Page 6

SET UP THE SCALE’S WI-FI CONNECTION

(Prior to first use, or when changing routers.)

STEP 1: Connect iOS device to your home Wi-Fi.

(Settings->Wi-Fi->On)

STEP 2: Turn Bluetooth “On” on your iOS device and it will start

searching for the Scale.

STEP 3: Wait until the model name, “iHealth HS5xxxxx” , and “Not

Paired” appear on your device’s Bluetooth screen. Select

the model name “iHealth HS5xxxxx” to pair and

connect. (Note: it may take up to 30 seconds for your iOS

device to detect the Bluetooth signal”)

Open the battery cover on the back of the Scale and

insert four “AA” batteries.

If “Lo” appears on the LED, replace all the

batteries.

Rechargeable batteries are not suitable for this

Scale.

To avoid damage as a result of battery leakage,

remove the batteries if the Scale is not going to

be used for 3 months or more.

Avoid getting battery fluid in your eyes. If it gets

in your eyes, immediately rinse with clean water

and contact a physician.

Install Batteries

Select a weight unit by adjusting

the switch under the battery cover.

Select Weight Unit

The Scale and the batteries must be disposed of according to

local regulations at the end of their service life.

and WPA2 personal security modes.

PUSH