H3C Technologies H3C LSWM1WCM10 Access Controller Module User Manual

Page 34

background image

27

After modification of the parameters, the system display returns to the BootWare operation Ethernet port

submenu.

====================================

|<1> Update Full BootWare |

|<2> Update Extend BootWare |

|<3> Update Basic BootWare |

|<4> Modify Ethernet Parameter |

|<0> Exit To Main Menu |

==========================================================================

Enter your choice(0-4):

Select 1 in the BootWare operation serial port submenu. Then, respond to the following prompts:

Loading...................................................................

..........................................................................

.........................................................Done!

354232 bytes downloaded!

Updating Basic BootWare? [Y/N]Y

Updating Basic BootWare...............Done!

Updating Extend BootWare? [Y/N]Y

Updating Extend BootWare..............Done!

After download of the BootWare program file, the system display returns to the BootWare operation
Ethernet port submenu.

====================================

|<1> Update Full BootWare |

|<2> Update Extend BootWare |

|<3> Update Basic BootWare |

|<4> Modify Ethernet Parameter |

|<0> Exit To Main Menu |

==========================================================================

Enter your choice(0-4):

Select 0 in the BootWare operation Ethernet port submenu to return to the BootWare operation submenu:

==================================================

|Note:the operating device is cfa0 |

|<1> Backup Full BootWare |

|<2> Restore Full BootWare |

|<3> Update BootWare By Serial |

|<4> Update BootWare By Ethernet |

|<0> Exit To Main Menu |

==========================================================================

Enter your choice(0-4):

Select 0 in the BootWare operation submenu to return to the BootWare main menu:

====================================================

|<1> Boot System |

|<2> Enter Serial SubMenu |

|<3> Enter Ethernet SubMenu |

|<4> File Control |

|<5> Modify BootWare Password |

|<6> Skip Current System Configuration |