H3C Technologies H3C S5800 Series Switches - Manual (Page 13)

9
Step3 Place the RPS unit horizontally to an appropriate position in the
rack, and then fix the mounting brackets to the front
square-holed brackets of the rack with M6 screws and cage
nuts, as shown in
Figure 4 .
Figure 4 Install the RPS unit to a 19-inch rack (II)
Installing the RPS unit on a tabletop
If a 19-inch standard rack is not available, you can place the RPS unit
directly on a clean, stable tabletop. Follow these steps to install the RPS
unit on a tabletop:
Step1 Cautiously turn the RPS unit upside down. Then, use a piece of
dry, soft cloth to remove any oil stain or dust from the dents on
the bottom of the chassis.
Step2 Peel off the stickers on the supplied foot pads and paste the foot
pads into the dents on the chassis bottom.