Atlantic Water Gardens Oasis FB2400 - Manual (Page 4)

1-877-80-PONDS
www.atlanticwatergardens.com
To complete installation, cover the Fountain Basin with gravel, polished
stones, glass beads or other decorative material. To disguise the square
outline of the Basin further, extend the material past the edge of the
Basin. To enhance nighttime enjoyment of the fountain, complement
your Fountain Basin with Atlantic’s LED lighting (Figure 6).
Set the decorative piece over the fitting, then attach the ½” standpipe
to the fitting. Cut the standpipe to just below the water surface to
create a bubbling effect. Seal any gaps between the standpipe and the
base of the pot with Atlantic SPSEAL. To center and stabilize the
standpipe, place a few rocks around it inside the decorative piece to
support it. Figure 5 shows the fountain ready for water. Fill the Basin
with water, connect the pump to a GFI-protected outlet and adjust
flow as necessary (Figure 5).
Figure 5.
Figure 6.