ATL Telecom Proscend 100 VDSL2 LAN Extender - Manual (Page 7)

VDSL2 LAN Extender User Manual V0.01
6
2.1.1 Switches
The following table describes the DIP Switches’ setting:
Pin 1 Pin 2 Pin 3 Pin 4
Side Channel Rate Limit SNR
Off CO Interleave Symmetric 9dB
On CPE Fast Asymmetric 6dB
Pin 1: CO, CPE switch
GO: LAN Extender acts as Central Office (CO) side.
GPE: LAN Extender acts as Customer Premise Equipment (CPE) side.
Pin 2: Impulse noise protection
Interleave mode: Provides communication protection for up to 250ms
impulse noise with latency less than 6 ms.
Fast mode: Direct data transmission with latency less than 1 ms.