ARM Electronics DVRHD OSD - Manual (Page 7)

OSD Setup Manual
6
Menu System Overview ʳ ʳ ʳ
The detailed functions and settings of Versatile H.264 DVR can be set by entering the
intuitive Graphical User Interface (GUI) OSD setup menu. Collaborating with a USB mouse,
setting up the DVR can be easy as operating on a PC. This chapter particularizes the items
and options in the OSD setup menu.
< Username and Password >
Press MENU and input a valid username. There are two preset accounts: “admin” and
“user”. The default username “admin” can be inputted via pressing the hot key MENU, while
“user” can be inputted via pressing the hot key SEARCH. Move to and press ENTER
to proceed.
Input Username
A B C D E F G H I J K L M
N O P Q R S T U V W X Y Z
a b c d e f g h i j k l m
n o p q r s t u v w x y z
0 1 2 3 4 5 6 7 8 9 . ! @
# í _ , “ + = *
Ż Ź Backspace Delete
Cancel OK
The next step is to enter a corresponding password. The preset password for “admin” is
“1234”, and the password “4321” is for “user”.
Password Verification
____________
Press Channel Keys To Enter Password
(4-8 Digits)
Press Ż Key To Delete
NOTE: It is strongly suggested to change the preset password to prevent
unauthorized access to the DVR.
An icon displayed at the upper-right corner of the screen will show the authority level of the
account. Under logout condition, the icon will show “N”. When an account is logged in, its
authority level number (1~8) will be shown.
Before completely logout, other functions can also be accessed without having to login
again. There are two ways to logout: manually logout by pressing ESC key at Live mode, or
auto logout after 5 minutes idle time at Live/ Menu mode.