ZeeVee HDbridge Rack - Manual (Page 2)

Page 2 of 8 www.zeevee.com HDbridge Rack Chassis Get Going Guide Page 3 of 8
Quality RF wiRing
Compression connectors
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the
manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug.
A polarized plug has two blades with one wider than the other. A ground-
ing type plug has two blades and a third grounding prong. The wide blade
or the third prong is provided for your safety. If the provided plug does not
fit into your outlet, consult an electrician for replacement of the obsolete
outlet.
10. Protect the power cord from being walked on or pinched, particularly at
plugs, convenience receptacles, and the point where they exit from the
apparatus.
11. Unplug this apparatus during lightning storms or when unused for long
periods of time.
12. Only use attachments/ accessories specified by the manufacturer.
13. Refer all servicing to qualified service personnel. Servicing is required when
the apparatus has been damaged in any way, such as power-supply cord
or plug is damaged, liquid has been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.
Important Safety Instructions
What’s in the Box
HDbridge Rack Chassis •
Get Going Guide •
DC POwER SyStEM
Supplies up to 8 modules
6Ru tall*
8 channels
lan wiRing
Customer supplied
aC POwER
Single connection
8 ChannEl COMbinER
Pre-wired at factory
RF aMPliFiER
34 dbmv launch power for
all 8 channels
SinglE RF COnnECtiOn
Carries all 8 channels
Rack Chassis – HDb-RK1
*with modules installed
Specifications
RF Output Output Power +34dBmV typical
Power AC Input +120V, 1.6A
Physical Width 19 Inches
Height 7 Inches (empty)
10.49 Inches (with modules installed)
Depth 10.25 Inches
Weight 11.5 Lb. (empty)
30.5 Lb. (with 8 modules installed)
Temperature/Humidity Operating +32F to +104F (0C to +40C) /
20% to 80%, non-condensing