Widex PHONE-Dex - Manual (Page 10)

10
English
Expanded system
(two or more handsets – also in connection with other phones)
The call number for internal calls will be shown in the display in standby mode. The base unit
should be positioned centrally so that the coverage area is roughly equal for all handsets.
Intercom / internal call
1. Press (right menu button).
2. If using more than 2 handsets: Enter the call number 1-5 for the desired handset or
press 9 for all.
A tone will be heard if an external call comes in while an internal call is in progress. End the
internal call with L, and then answer the external call with q.
Transferring calls/Conference between handsets
1. An external call is in progress.
2. Press . Scroll to
INTERCOM. Press OK.
3. If using more than 2 handsets: Enter the call number 1-5 for the desired handset, or
press 9 for all.
4. To transfer: press L, for conference: hold down * pressed down.
Register additional, GAP-compatible handsets
The handset included in the package is already registered to the base unit. You can register up
to 4 additional, GAP-compatible handsets.
Note!
This model is GAP (Generic Access Profile) compatible, which means that the handset and
the base unit can both be used with most other GAP-compatible units irrespective of man-
ufacturer. However, the GAP protocol cannot guarantee that all functions may be accessed.
Extra handsets will not be available as accessories.
1. Hold down J on the base unit for around 6 seconds.
2. Press . Scroll to
REGISTRATION. Press OK.
3. Enter the base unit’s PIN code (e.g. 0000). Press OK.
4. If the REGISTRATION is successful, the unit will return to standby mode within one
minute. (This description refers to the menu navigation in a PHONE-DEX handset. If you
want to register another type of handset, please follow the respective menu prompts.)