Westermo GD-01 - Manual (Page 4)

4 6196-2211
Safety
General:
Before using this unit, read the manual completely, and make sure that you
understand it fully. Check that your application does not exceed the safe
operating specifications for this unit.
Before installation, maintenance or modification work:
Prevent damage to internal electronics from electrostatic discharges (ESD)
by discharging your body to a grounding point (e.g. use of wrist strap).
Prevent access to hazardous voltages by disconnecting the unit from AC/DC
mains supply and all others electrical connections.
Installation:
This unit is constructed for professional system use. It should be located in a
restricted access area, such as locked cabinet which can only be accessed by
service personnel.
This unit is intended for permanent connection to the AC/DC power supply
and should only be installed by qualified personnel.
The AC/DC power supply wiring must be sufficiently fused, and if necessary
it must be possible to disconnect the unit manually from the voltage supply.
Ensure compliance to national installation regulations.
This unit is a class II equipment, and does not rely on protective earthing.
This unit uses convection cooling.To avoid obstructions to the airflow around
the unit, follow the spacing recommendations (see Installation).
Approvals
Conformity with the Directive 99/5/EEC (Radio Equipment & Telecommunications
Terminal Equipment) has been assessed by application of the standards
• EN60950 (user safety),
• EN 301 489-1 (Electromagnetic compatibility),
• EN 301 489-7 (Electromagnetic compatibility),
• EN 61000-6-2 (Electromagnetic compatibility, industrial immunity),
• EN 61000-6-3 (Electromagnetic compatibility, residential emission)
• EN 301 419-1 (Radio spectrum matters),
• EN 301 420 (Radio spectrum matters),
The GD-series of modems are fully compliant with ETSI GSM Phase 2+ standard.
!
!
!