Daewoo DSA-9310E - Manual (Page 38)

38
SOUND
. There may be cases of stereo broadcasts where excessive noise will be
heard due to weak incoming signal. You may be able to eliminate this
noise by selecting the MONO mode.
During a stereo Program transmission
Press the Sound( ) button.
It will change to MONO from STEREO.
Then the Banner OSD will be changed to
MONO.
Press the Sound ( ) button again
It will change it back to stereo.
During a bilingual programme transmission
Press the Sound ( ) button.
It will change the language to the second
channel (DUAL SUB).
Press again will change it back to the main
channel (DUAL MAIN).
1
2
1
2