Dynaudio BM 10S - Manual (Page 22)

20
TECHNICAL SPECIFICATIONS
Technical Specifications for BM10S BM12S
BM12S BM10S
Frequency Response (+/- 3 dB) 18 Hz - 250 Hz 25 Hz - 250 Hz
Low Frequency Limit* 18 Hz - 27 Hz 25 Hz - 33 Hz
High Frequency Limit* 60 Hz - 250 Hz 60 Hz - 250 Hz
Amplifier Power 250 W @ 4 Ohms 200 W @ 5 Ohms
Crossover Frequencies 60 Hz / 80 Hz / 100 Hz 60 Hz / 80 Hz / 100 Hz
Crossover Slope 4th order Linkwitz-Riley 4th order Linkwitz-Riley
Crossover Bypass Yes (Flat) Yes (Flat)
Phase adjustment 0° / 90° / 180° / 270° 0° / 90° / 180° / 270°
Inputs Single ended/RCA, Balanced/XLR Single ended/RCA, Balanced/XLR
Input Sensitivity for Full Output* 0.1 V - 5 V 0.1 V - 5 V
Maximum Input 10 V 10 V
Input Impedance 20 k Ohms 20 k Ohms
Output Single ended/RCA, Balanced/XLR Single ended/RCA, Balanced/XLR
Master / Slave Link Yes Yes
Remote Control included included
No. of Presets 4 4
Each Preset includes level, crossover frequency, phase, level, crossover frequency, phase,
extended frequency range extended frequency range
Drive Unit 12" (30 cm), long throw 10" (24 cm), long throw
Magnetic Shielding Yes Yes
Internal Cabinet Volume 36 litres 19 litres
Bass Principle Closed Ported
Power Consumption Max. 480 W 480 W
Power Consumption Standby 5 W 5 W
Mains Voltage** 120 V/60 Hz or 230 V/50 Hz 120 V/60 Hz or 230 V/50 Hz
Weight (net) 28.2 kg 16.7 kg
Dimensions (W x H x D) 360 x 378 x 576 mm 320 x 338 x 474 mm
* Depended on setting
** Please refer to your local network
Note: Technical specifications are subject to change without notice.