Sundance SMT8090-365 - Manual (Page 5)

Version 1.2 Page 5 of 12 SMT8090 User Manual
Outline description.
The SMT8090_365 is a single-C6416 based module (SMT365) combined with a dual
high-speed ADC module (SMT390-VP composed of SMT338-VP and SMT390).
SMT365 characteristics:
⇒
single TMS320C6416 processor running at 600MHz (64 bits)
⇒
Six 20MB/s communication ports (comm.-ports)
⇒
up to 16MBytes of ZBTRAM (133MHz)
⇒
8MByte Flash ROM for boot code and FPGA programming
⇒
Global expansion connector
⇒
General purpose I/O connector
⇒
High bandwidth data I/O via 2 Sundance High-speed Buses (SHB).
SMT390-VP characteristics:
⇒
Two 12-bit ADCs ( AD9430-210 ) sampling at up to 210MHz via LVDS bus
( SLB ),
⇒
Two Sundance High-speed Bus (SHB) connectors,
⇒
Two 4-channel Rocket Serial Link ( RSL ) connector – 2.5Gbits/second each,
⇒
Two 20 MegaByte/s communication ports,
⇒
Low-jitter on-board system clock,
⇒
Xilinx Virtex-II Pro FPGA (VP30-6),
⇒
50-Ohm terminated analogue inputs and outputs, external triggers and
clocks via MMCX or MMBX(Huber and Suhner) connectors,
⇒
User defined pins for external connections,
⇒
Compatible with a wide range of Sundance SHB modules,
⇒
TIM standard compatible.
The SMT8090_365 is a demonstration software for the evaluation of the SMT365
and SMT390-VP modules. It can be used for prototyping 3G (3
rd
generation) systems
and high-speed data acquisition system with or without digital processor. This
document is an installation guide for the SMT8090_365 demonstration system.
The SMT8090_365 application gets the DSP on the SMT365 to configure the
SMT390_VP FPGA and control clock frequencies, clock routings, data format and
data capture. The DSP grabs data from both channels and stores them into a file for
further processing, like display and FFT.