Valet take-over – Directed Electronics PYTHON 413 User Manual
Page 12
6
© 2009 Directed Electronics. All rights reserved.
To turn the rear defogger On:
Simultaneously press & release the
1.
�������
+
+
�������
buttons on the
remote control.
The lights flash 3 times.
2.
The rear defogger activates when the vehicle is remote started.
3.
Note:
If the remote start is On the lights turn Off then flash 3-times be-
fore returning to normal, and the defogger activates as programmed.
➢
Valet Take-Over
The Valet Take-Over feature allows the vehicle to remain running after
the key has been removed from the ignition. This feature is useful for
occasions when you wish to exit and lock the vehicle for short periods
of time, but would like to leave the motor running and the climate
controls on.
To perform Valet Take-Over:
Before turning off the engine, press and release
1.
on the remote
control for 1 second.
Turn the ignition key to the OFF position. (The engine will stay
2.
running.)
The vehicle will run for the pre- pro gram med period of time (12,
3.
24, or 60 minutes) or until a shutdown input is trig gered.