NCast Telepresenter M4 - Manual (Page 11)

NCast Telepresenter Reference Manual
8. Go to the View page. This page allows you to connect different media desktop players using
either multicast or RTSP (unicast) protocol. If you have Quicktime installed on your PC, click
on “Quicktime Multicast” if you have multicast on your network or “Quicktime RTSP” for
unicast. Your client player should launch and you should see your captured graphics and
video. For other client players, try clicking on the “SDP” link. You’re done!
1.6.3. Long Start
Read this whole manual from cover to cover (RTFM). There are hundreds of different configuration
options for a Telepresenter, allowing the setup and composition of many different formats, resolutions,
PIP options, layouts, bit-rates, frame-rates, start and stop and scheduling options and the like. You
can automatically upload your archives to a video-server. You can tag your archives automatically
with course numbers and notes. You can add your own customized graphic overlays to the captured
graphics and video. Transmission can be automated so that all that is required is to press the power-
on button.
Please feel free to contact NCast Corporation if you have any questions about the use or
configuration of the Telepresenter.
NCast Corporation Revision 2.2
Page 11