La Crosse Technology WS-9400 - Manual

Indoor temperature
in ºF
Indoor relative
humidity in %
TEMPERATURE STATION
INTRODUCTION:
Congratulations on purchasing this temperature station with indoor temperature, humidity and comfort
indicator. To enjoy the full benefits of this innovative product, please read this operating manual
completely before operating.
TEMPERATURE STATION:
FEATURES:
• Indoor temperature display in degree Fahrenheit (°F)
• Indoor humidity display in RH%
• Wall mounting or table standing
SETTING UP:
Please follow these steps to ensure that your new temperature station works correctly:
1.
Insert the batteries into the temperature station. See “How to install and replace batteries in the
Temperature Station” below.
2. Once the batteries are in place, all segments of the LCD will light up briefly. Then the indoor
temperature and humidity will be displayed. If the indoor temperature is not displayed after a few
seconds, remove the batteries and wait for at least 30 seconds before reinserting them.
HOW TO INSTALL AND REPLACE BATTERIES IN THE TEMPERATURE STATION:
The temperature station uses 2 x AAA, 1.5V batteries. To install and replace the batteries, please follow
the steps below:
1. Insert finger or other solid object in the space at the right
center of the battery compartment and lift up to remove
the cover.
2. Insert batteries observing the correct polarity (see
marking).
3. Replace battery compartment cover.
TO RESET THE TEMPERATURE STATION:
1. Remove the batteries from the temperature station
2. Wait at least 30 seconds and repeat the procedures in Setting up above
BATTERY CHANGE:
It is recommended to replace the batteries in all units on an annual basis to ensure optimum accuracy of
this unit.
Please participate in the preservation of the environment. Return used batteries to an
authorized depot.
LCD SCREEN
The Temperature Station’s LCD is divided into 2 sections, displaying indoor humidity and indoor
temperature.
LCD
display
Hanging hole
Foldable stand
Battery
compartment