Icom IC-M73 Plus - Manual (Page 27)

19
7
FUNCTION MODE OPERATION
New2001
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
When this function is turned ON, the transceiver automati-
cally records the received signal into the memory.
The maximum recording time is 60 seconds.
• The transmit signal cannot be recorded.
• If a signal less than 60 seconds is recorded, the next recorded
signal is added into the same data.
• The recording threshold level can be set in the set mode. See
page 30 for details.
NOTE: Even if you turn OFF the transceiver, this function re-
mains ON.
q Push [F] to enter the function
mode, and then push [Y]/[Z] to
select the automatic recording
function.
• “A-REC” appears.
e w e Push [H/L•LOCK] to turn the
function ON or OFF.
• The automatic recording icon ap-
pears when the function is turned
ON.
• After pushing [H/L•LOCK], exits
the function mode.
e e e When a signal is received, the
transceiver automatically starts
recording.
• “REC” appears while recording.
• The recording will automatically
stop when the received signal dis-
appears, or the received signal strength becomes weaker
than the set threshold level in the set mode
(p. 30).
Automatic recording
mode appears.
“REC” is appeared
while recording.
Automatic recording
icon appears.
• Example— Automatic recording
[Less than 60 seconds]
[More than 60 seconds]
Example: 40 seconds
60 seconds
When receiving a signal for 60
seconds or less, this function
records all contents.
After 60 seconds has passed from
starting the automatic recording,
this function records the 60 seconds
before stopping to record. These contents
won’t be recorded.
Starts recording
Starts recording
Stops recording
Stops recording
■
Automatic recording function (Depending on versions)