IVATION AMZMAVET732 (WIRELESS BBQ) - Manual

INSTRUCTION MANUAL
IVATION WIRELESS BBQ THERMOMETER
INTRODUCTION
Congratulations on your purchase of the Ivation Wireless BBQ Thermometer, a programma-
ble radio frequency food thermometer. You will now be able to remotely monitor the tem-
perature of grilling food and the temperature inside your grill from anywhere in your home.
Components
1. 1– Receiver unit
2. 1– Transmitter unit
3. 1– Detachable stainless steel FOOD probe
4. 1– Detachable stainless steel BARBECUE probe with clip
5. 4– AAA batteries.
Receiver Features
• LCD (Liquid Crystal Display) – Displays all icons, temperature and time.
• CLIP – Removable clip allowing you to have the receiver hang.
• BATTERY COMPARTMENT – Holds 2 AAA batteries.
• STAND (Removable Clip) – Swings out and allow you to stand the receiver on tabletop.
Buttons
1. HI/HR – In THERMOMETER MODE, press and hold until the digits flash; press to increase
the maximum BARBECUE temperature. Press and hold for 2 seconds to increase 10 de-
grees per second. In TIMER MODE, when the TIMER is stopped, press to set the hour. Press
and hold for 2 seconds to increase 10 hours per second.
2. LO/MIN – In THERMOMETER MODE, press and hold until the digits flash, press to increase
the minimum BARBECUE temperature. Press and hold for 2 seconds to increase 10
degrees per second. In TIMER MODE, when the TIMER is stopped, press to set the minute.
Press and hold for 2 seconds to increase 10 minutes per second.
3. LIGHT/MODE – Press to turn on the LCD back light for 5 seconds. Press and hold for 2
seconds to select THERMOMETER MODE or TIMER MODE.
4. HI/CLEAR – In THERMOMETER MODE, press and hold until the digits flash, press to
increase the maximum FOOD temperature. Press and hold for 2 seconds to increase 10
degrees per second. In TIMER MODE, when the timer is stopped, press to clear the timer
setting back to 0:00.
5. ALERT, ºC /ºF, START/STOP –Press and hold for 2 seconds to switch between ºC and ºF
display. In THERMOMETER MODE, press to turn ON/OFF the alarm. In TIMER MODE, press
to start or stop the timer countdown or count up.
6. Power – Press to turn ON/OFF the receiver.
Transmitter Features
• LCD (Liquid Crystal Display) – displays temperature of both FOOD and BARBECUE. It
will automatically switch between FOOD and BARBECUE displays.
(Note: Press the re-sync button to switch the display between ºC and ºF.)
• WIRE STAND – Allows you to stand the receiver on tabletop or it can be reversed
and used as a hanger.
• BATTERY COMPARTMENT – holds 2 AAA batteries.
• FOOD – Plug-in for stainless steel FOOD probe.
• BARBECUE –Plug-in for stainless steel BARBECUE probe.