IVATION BRI20EA5-1 Digital Safe Box - Manual

Instructions for Use of Electronic Safe
Notice: For the first opening, please take off the cover (on
the middle of keypad), then take out the tubular emergency
key from the plastic bag, insert the key into the lock hole, turn
the key, then turn the knob to open the door. After that, put 4
batteries of 1.5V in the battery box (on the back of the door),
then leave the door open and take the keys out.
I. Change the personal code
Press the red reset button( on the left-side of back of door), the
yellow light will be on, then input any 3-8 digits you want, press “A”
or “B” to confirm, followed by two beeps, indicating that the new
code have been accepted and stored.
If the yellow flash with the buzzer beeps three times means the new
code is invalid and should operate again.
II. Open the safe
Input the personal code, followed by one beep and yellow light
flashing, then press ”A” or “B” to confirm, the green light will be on,
rotate the knob and pull out, the door is opened. If the code you
input is incorrect, there will be 5 beeps sound. If 3 incorrect codes
input continuously, the keypad will be blocked for 20s.
III. Lock the safe
Close the door, then turn the knob anti-clockwise, the control system
works and the safe will be locked..
IV. Emergency status
(1) If you forgot the code, use the emergency key to open the safe
as the first opening, and then press the red button(on the left-
side of back of door) to reset the code.
(2) If both the red light and green light are on, indicating that you
should change the batteries. Please have a test before you
close the door.
Please keep the emergency keys out of the safe.
™
IVATION / 2 Bergen Tpke. / Ridgefield Park, NJ, 07660 / WWW.IVATIONUSA.COM