Induction Dynamics SW1 - Manual (Page 5)

4 Audio Perfection Realized
™
Amplifier Location
The A2 amplifier is best located in an equipment rack or shelving with other audio and
video equipment. It is not recommended for placement behind walls or other limited access
locations, where service may be restricted.
The A3 amplifier is built in to the SW1. If you chose the A3 option, make sure to place your
SW1 in an open area with plenty of ventilation. Do NOT build in to walls or place the SW1
in a closed area.
Speaker Wire
Use approved wire designed for in-wall or exposed use, as appropriate for your installation.
For the SW1, we recommend using high-quality speaker wire that is 12 gauge or lower,
with easily visible polarity coding to make your connections. The following chart identifies
minimum gauge requirements for various lengths. See your local dealer or installation
contractor for more information.