IDK OPF-H1000-A - Manual (Page 23)

OPF-TH1000-A/OPF-RH1000-A User’s Guide
23
(This is the quarter rack size; projection portion is not included.)
Weight 0.4 kg/0.88 lbs
Temperature For use: 0°C to + 40°C/104°F; for storage:-20°C/ 4°F to +80°C/176°F
Humidity For use and storage: 20% to 90% (Non condensing)
Shipping
group
AC adapter with spring type lock (1.2 m/3.94 feet), cable clamp
Option Tie plate (FP-70)
■Specifications of Standard SFP
Multimode fiber Singlemode fiber
Connector LC (Duplex)
Wave length 850 nm (Oxide VCSEL laser*
9
) 1310 nm (Fabry-Perot laser*
9
)
Max. extension
distance
OM3: 300 m/984.25 feet,
OM4: 1 km/3280.84 feet
OS1: 4.7 km/15419.94 feet
Output level -9 dBm to -2.5 dBm -8.4 dBm to -3 dBm
Input level -13 dBm or higher -18 dBm or higher
■Model names
Multimode fiber
Transmitter OPF-TH1000-A-MM
SFP module for multimode is mounted.
Receiver OPF-RH1000-A-MM
Singlemode fiber
Transmitter OPF-TH1000-A-SM
SFP module for singlemode is mounted.
Receiver OPF-RH1000-A-SM
*
1
HEC and ARC are not supported.
*
2
Use an HDMI cable that is 5 m/16.4 feet or shorter.
*
3
WUXGA is only for RB (Reduced Blanking) plus DVI signals.
*
4
Deep Color is not supported.
*
5
Analog audio input cannot be embedded in digital video.
*
6
Analog audio output cannot be embedded from digital audio.
*
7
Polishing methods other than recommended methods can also be used, but they increase return loss and it
changes extension distance.
*
8
Maximum extension distances are measured under the following conditions:
• recommended polishing method is used,
• no additional connections through the path way, and
• allowable bending radius is not exceeded.
*
9
The laser meets Class 1 of JIS C 6802, which specifies design safety.
Notes:
• The supplied AC adapter is only for the OPF-H1000. Do not use it for other products.
• Specifications are subject to change without notice.
• All nominal levels are at ±5%.