IDK GF-100 - Manual (Page 59)

GF-100 User’s Guide
59
11 Setting list
Setting item Page Menu Set value Default
Key lock P.18 - OFF, ON OFF
Beep for source P.28 SETTINGS → SOURCE LOG → BUZZER OFF, ON OFF
Source status
Escape sequence
P.28
SETTINGS → SOURCE LOG → ESCAPE
CODE
DISABLE
ENABLE
ENABLE
Wait time for detecting source
status
P.28 SETTINGS → SOURCE LOG → DETECT WAIT
NO WAIT
100ms to 10000ms
800ms
EDID output mode P.30 EDID OUT → EDID MODE
AUTO
ORIGINAL
BANK 1 to 5
AUTO
Resolution of GF-100 original
EDID
P.31
EDID OUT → RESOLUTION
SVGA to QWXGA 1080p
Color depth of GF-100 original
EDID
P.31
EDID OUT → COLOR DEPTH
24 bit
24/30 bit
24/30/36 bit
24 bit
The number of audio channels
of GF-100 original EDID
P.32 EDID OUT → AUDIO CHANNEL 2, 2.1, 3.1, 5, 5.1, 7, 7.1CH 7.1 CH
Audio format of GF-100
original EDID
P.33
EDID OUT → PCM
OFF,MAX 32.0 to 192.0 kHz MAX 48.0 kHz
EDID OUT → Dolby Digital OFF, MAX 32.0 to 48.0 kHz MAX 48.0 kHz
EDID OUT → AAC OFF, MAX 32.0 to 96.0 kHz MAX 48.0 kHz
EDID OUT → Dolby Digital+ OFF, MAX 32.0 to 48.0 kHz MAX 48.0 kHz
EDID OUT → DTS OFF, MAX 32.0 to 96.0 kHz MAX 48.0 kHz
EDID OUT → DTS-HD OFF, MAX 32.0 to 192.0 kHz MAX 192.0 kHz
EDID OUT → Dolby TrueHD OFF, MAX 32.0 to 192.0 kHz MAX 96.0 kHz
Test pattern/tone P.39 TEST PATTERN → OUTPUT OFF, ON ON
Selecting test pattern P.40 TEST PATTERN → CONTENTS
75% COLOR BAR to
BLUE RASTER
SMPTE COLOR
BAR
Test pattern resolution P.41 TEST PATTERN → RESOLUTION
AUTO
VGA to QWXGA
[email protected]@60Hz
AUTO
Test pattern HDCP P.42 TEST PATTERN → HDCP OUT AUTO, OFF, ON AUTO
Test pattern format/color
space
P.42
TEST PATTERN → FORMAT
AUTO
DVI
HDMI RGB
HDMI YCbCr4:2:2
HDMI YCbCr4:4:4
AUTO
Test pattern color depth P.42 TEST PATTERN → COLOR DEPTH AUTO, 8 bit, 10 bit, 12 bit AUTO
Selecting test tone P.43 TEST PATTERN → TEST TONE
MUTE
400Hz(CH3=30Hz)
400Hz(CH3=80Hz)
1000Hz(CH3=30Hz)
1000Hz(CH3=80Hz)
1000Hz
(CH3=80Hz)