IBASE FWA7108 - Manual (Page 4)

4
Safety Information
Your FWA-7108 is designed and tested to meet the latest standards of safety for
information technology equipment. However, to ensure your safety, it is important that
you read the following safety instructions.
Setting up your system
•
Read and follow all instructions in the documentation before you operate your
system.
•
Do not use this product near water.
•
Set up the system on a stable surface or secure on wall with the provided rail. Do
not secure the system on any unstable plane or without the rail.
•
Do not place this product on an unstable cart, stand, or table. The product may
fall, causing serious damage to the product.
•
Slots and openings on the chassis are for ventilation. Do not block or cover these
openings. Make sure you leave plenty of space around the system for ventilation.
Never insert objects of any kind into the ventilation openings.
•
This system should be operated from the type of power indicated on the marking
label. If you are not sure of the type of power available, consult your dealer or
local power company.
•
Use this product in environments with ambient temperatures between 0
˚C and
45
˚C.
•
If you use an extension cord, make sure that the total ampere rating of the
devices plugged into the extension cord does not exceed its ampere rating.
Care during use
•
Do not walk on the power cord or allow anything to rest on it.
•
Do not spill water or any other liquids on your system.
•
When the system is turned off, a small amount of electrical current still flows.
Always unplug all power, and network cables from the power outlets before
cleaning the system.
•
If you encounter the following technical problems with the product, unplug the
power cord and contact a qualified service technician or your retailer.
 The power cord or plug is damaged.
 Liquid has been spilled into the system.
 The system does not function properly even if you follow the operating
instructions.