IBASE FWA6504 - Manual (Page 8)

FWA6504 User’s Manual 7
The Jumpers
JP1: Clear CMOS Contents
Use JP1 to clear the CMOS contents.
Note that the power connector or jack should be disconnected from the board before clearing CMOS.
JP1 Setting Function
Pin 1-2
Short/Closed
Normal
Pin 2-3
Short/Closed
Clear CMOS
JP4, JP5: LAN Bypass & WDT Reboot Setting
JP4
JP5
Setting Function
Power
OFF
Power
ON
Power ON
OS run software
Normal Bypass Normal Bypass Normal Bypass
JP4
1-2 & 3-4 Open
JP5
1-2 Closed
LAN bypass
upon the
time out of
WDT.
  
JP4
3-4 Closed
1-2 Open
JP5
1-2 Closed
LAN bypass
& system
reboot upon
the time out
of WDT.
 
LAN Always
Normal
WDT Reboot
System
JP4
1-2 & 3-4 Open
JP5
2-3 Closed
LAN bypass
controlled
by Super IO
GP54 or
setting in
BIOS.
BIOS Setting **
GP54 Active:
Low: Bypass
High: Normal
** Note that the Bypass setting in BIOS is only working when JP4 & JP5 are set as this configuration.
De
fa
u
lt
Se
tt
in
g