IBASE IPPCXXA7-RE - Manual (Page 28)

20 IPPCxxA7-RE User Manual
Board Dimensions
2.2 Installing the Memory
The IB806 board supports two DDR3 memory socket for a maximum total memory of
2GB in DDR3 memory type.
Installing and Removing Memory Modules
To install the DDR3 modules, locate the memory slot on the board and perform the following
steps:
1. Hold the DDR3 module so that the key of the DDR3 module aligned with that on the
memory slot.
2. Gently push the DDR3 module in an upright position until the clips of the slot close to hold
the DDR3 module in place when the DDR3 module touches the bottom of the slot.
3. To remove the DDR3 module, press the clips with both hands.