Operation procedure – Daewoo KOR-63RA User Manual
Page 8
7
The oven light is on only when the microwave
oven is operating.
The oven will automatically shut off at any time
by opening the oven door.
Each time a button is pressed, a BEEP will
sound to acknowledge the touch.
The oven automatically cooks on full power
unless set to a lower power level.
The display will show “ : 0” when the oven is
plugged in.
The time clock returns to the present time when
the cooking time ends.
When the STOP/CLEAR button is pressed during
the oven operation, the oven stops cooking and all
the information is retained. To erase all information
(except the present time), touch the
STOP/CLEAR button once more. If the oven door
is opened during the oven operation, all
information is retained.
If the START button is pressed and the oven does
not operate, check the area between the door and
door seal for obstructions and make sure the door
is closed securely. The oven will not start cooking
until the door is completely closed or the program
has been reset.
OPERATION PROCEDURE
This section includes useful information about oven operation.
1. Plug power supply cord into a 230V 50Hz power outlet.
2. After placing the food in a suitable container, open the oven door and put it on the glass tray.
The glass tray and roller guide must always be in place during cooking.
3. Shut the door. Make sure that it is firmly closed.
1
2
3
4
5
6
7
8
Make sure the oven is properly installed and
plugged into the electrical outlet.
WATTAGE OUTPUT CHART
• The power-level is set by pressing the POWER/DEFROST button. The chart shows the display, the power
level and the percentage of power.
Press POWER/DEFROST
button
Power level (Display)
Approximate Watts
%
once
P-HI
800 Watts
100%
twice
P-80
640 Watts
80%
3 times
P-60
480 Watts
60%
4 times
P-40
320 Watts
40%
5 times
P-20
160 Watts
20%
KOR-63RA0S(¿ )-Desuk
02.9.27
11:22
AM
˘
`
7