Connections, Antenna and phone – DirecTV D10-300 User Manual
Page 9
9
Connections
Unplug all equipment from the AC outlet before making connections.
1 - Connect the RF coaxial cable from the satellite dish to the SAT IN connector.
2 - If you have cable (CATV) or an off-air antenna, connect its RF coaxial cable to the OFF AIR IN connector
3 - Using the telephone cord (supplied), connect one end of it to a phone jack in your home. Connect the other end to
the PHONE JACK input on the rear of the Receiver.To enjoy uninterrupted programming and to order pay per view
programs, the DIRECTV
®
Receiver must be continuously connected to a land-based phone line.
4 - Connect one end of the AC power cord (supplied) to the Receiver's AC IN plug.
5 - Do not plug your DIRECTV Receiver to the mains power outlet until all connections are done.
Antenna and Phone
D10-300-6 27/09/04 17:13 Page 9