DXG Technology DXG Digital Camera - Manual (Page 50)

48
4. Recording TV programs
For more information on recording TV programs, please refer to this section.
4.1 Operation instructions
1. Use the AV IN cable to connect the camera to external audio equipments, and the camera
will pop up an AV IN interface.
2. Use the joystick (first the right button , then Left/Right button ) to select to record
programs or not (select to record, but not), and press the OK to confirm.
3. The display of pictures by the screen and the playing of the sound by the speaker are
synchronized with the external audio/video. Press the OK
and the camera will start
recording.
4. Press the OK again to stop recording.
5. The setting of the function and replaying is the same as that the Photo mode.
6. Press the Mode button to return to AV IN interface.
Note: do not press any button while recording. If SD card/MMC card or NAND FLASH is full, the
camera will prompt.