Diamondback Fitness 660Tm - Manual (Page 10)

10
6 0 0 S E R I E S T R E A D M I L L O W N E R’ S M A N U A L
Console Layout
Heart Rate Monitoring
Wireless Heart Rate Receiver
The 650T/660T units come standard with a built-in receiver for heart rate monitoring. To get an accurate reading using this device, you will
need to wear a Heart Rate chest strap transmitter and stand within 3 feet of the console, and a minimum of four feet from others using a heart
rate monitoring device. While exercising with a chest strap on, the console will display the measurement of the heart rate when the
“SELECT” key is pressed.
Do not operate the Heart Rate monitor transmitter together with an electrical Heart Rate Pacemaker. The transmitter may cause electrical
disturbances.
Elevation
Adjustment Keys
Program
Selection Keys
Speed
Adjustment Keys
Safety
Key
Safety Key and Clip
The safety key is designed for safety use only. When you pull the safety key, it will cut the power to the treadmill and bring the treadmill to an
immediate stop. Press the “Stop” button if you need to stop the treadmill. Do not pull the safety key unless it is for an emergency stop. The
treadmill will not restart until safety key is re-engaged on the console properly.
Wear the safety key and clip all times while using the 650T/660T.
Data Windows