Denon DN-A7100 User Manual

Page 15

ENGLISH

GENERAL INFORMATION OF RC-1065 TO DN-A7100

To control the DN-A7100 by your RC-1065, you have to select the device AMP or TUNER by pressing the
SOURCE button. Please refer below for the details in AMP and TUNER mode.

AMP MODE

TUNER MODE

POWER

Turns the DN-A7100 on and off

SLEEP

Sets the sleep timer function

DISPLAY

Changes the front display mode

P-DIRECT

Selects the pure direct mode

SURROUND

Selects the surround mode

AUTO (1)

Selects auto surround

DOLBY (2)

Selects DOLBY mode

dts (3)

Selects dts mode

BAND/LIP SYNC

Select LIP SYNC mode

CSII (4)

Selects CS2 mode

EX/ES (5)

Selects EX/ES

VIRTUAL (6)

Selects VIRTUAL mode

M-CH ST (7)

Selects the Multi Channel Stereo

STEREO (8)

Selects STEREO mode

NIGHT (9)

Turns on or off NIGHT mode

7.1ch IN (0)

Selects the 7.1ch input ports

A/D

Switches between the analog or digital inputs

MEMO/HT-EQ

Turns on or off HT-EQ mode

INFO

Turns on or off the “On Screen Display”

Display the current setting on the monitor

CURSOR 1 / 3 / 4 / 2

Moves the cursor for setting in “On Screen Display”

ENTER

Enters the “On Screen Display”
Confi rms the setting in “On Screen Display”

T-TONE

Enters the test tone menu

EXIT

Exits from SETUP MENU

VOL+

Adjusts up to the over all sound level

VOL-

Adjusts down to the over all sound level

ATT

Reduces the analog input level

MUTE

Decreases the sound temporarily

BASS-

Adjusts down to the tone control of low frequency sound

BASS+

Adjusts up to the tone control of low frequency sound

TREBLE-

Adjusts down to the tone control of high frequency sound

TREBLE+

Adjusts up to the tone control of high frequency sound

PTY/V-OFF

Turns on or off Video output

CH-SEL

Calls up SETUP MENU and adjusts speaker level or 7.1ch input level

AUX1

Input source select AUX1

AUX2

Input source select AUX2

TUNER

Input source select TUNER

Input source select TV

DVD

Input source select DVD

VCR

Input source select VCR

DSS/VCR2

Input source select DSS/VCR2

Input source select CD

TAPE

Input source select TAPE

CDR/MD

Input source select CDR/MD

0-9

Inputs the numeric

BAND/LIP SYNC

Select a radio band

T-MODE

Selects the auto stereo mode or mono mode

P-SCAN

Starts preset scan

Clears the input data

MEMO/HT-EQ

Enters the tuner preset memory numbers

PRESET-

Selects a preset station down

PRESET+

Selects a preset station up

TUNING-

Tunes a frequency station down

TUNING+

Tunes a frequency station up

INFO

Shows preset information

F-DIRECT

Selects the “Frequency direct input”

T-DISP

Selects the display mode in RDS

PTY/V-OFF

Turns PTY group or type search mode on or off

AMP

Select AMP mode

* POWER, SLEEP, DISPLAY, P-DIRECT, SURROUND, VOL+, VOL–, MUTE, BASS+,

BASS–, TREBLE+, and TREBLE- keys can be selected in TUNER mode the same
as in AMP mode.